How to increase the output of the crusher in the stone factory

In the production process of stone, the crusher equipment purchased by the user is difficult to achieve the production capacity mentioned in the manual. At this time, the user may doubt whether the equipment has been bought at a loss. It is suggested that you should not panic when facing this problem. Factors that affect the production capacity of the crusher equipment in the stone factory, utilization factors, and the advantages of avoiding weaknesses will improve the production effect of the crusher equipment in the stone factory. This article takes the crusher equipment of the stone factory as an example. Jiaozuo Zhongxin will analyze for you what factors affect the output of the crusher equipment in the stone factory? 1. Different crushed materials
    The physical properties of different materials are quite different, such as hardness, humidity, viscosity, etc., which will affect the output of the crusher equipment in the stone factory. With the different properties, it will show different crushing and sand production.
    2. Differences in material viscosity
    The viscosity of the material will affect the production output of the crusher equipment in the stone plant. The higher the viscosity, the easier it is to stick to the cavity of the equipment. If it is not cleaned in time, it will affect the work efficiency of the crusher equipment in the stone plant. Pay attention to the viscosity of the material, and it cannot be dyed out of the tolerance range of the equipment.
    3. Differences in the composition of materials
    The fine powder contained in the material is also the key point that affects the output of the crusher equipment in the stone plant. The content of fine powder is easy to adhere to the cavity of the crusher equipment in the stone plant, which affects the production of the crusher equipment in the stone plant. Therefore, the material with too much fine powder content , it should be sieved before production to avoid affecting the production output of the crusher equipment in the stone factory.
    4. Differences in material humidity
    If the moisture content of the material is too high, it is easy to adhere to the crushing cavity during crushing, and it is easy to cause blockage, resulting in a decrease in the production capacity of the crusher equipment in the stone factory. To solve this problem, the humidity of the material should be controlled when selecting the material. Air drying reduces the moisture content of the material.