Jaw Crusher_Zhongxin Heavy Industry

Description

　　Jaw Crusher is one of popular stone crushing machines used in mining industry and it is *ly suitable for both primary and secondary crushing. PE series single toggle Jaw Crusher has the features of * crushing ratio and uniform sizes. Jaw Crusher can be used to crush materials with compressive resistance less than 320 MPA.

　　Jaw Crusher is used for primary crushing and secondary crushing.The maximum compression strength of materials to be crushed is 320MPA. Our design and production are of high position both at home and abroad.

Features

　　1.High crushing ratio, well-distributed final product size.

　　2.Lubrication system of it is safe and reliable, which boasts an easy and convenient maintenance.

　　3.lubrication system of it is safe and reliable, which boasts an easy and convenient maintenance.

　　4.High ratio of crushing, homogeneous final product size.

　　5.Little noise and dust.

　　6.The deep crushing cavity increases the feeding capacity and output capacity.

Working principle

　　The motor transmits through belt,drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft.The angle between toggle plate and moving jaw plate increases when mobile jaw moving.So the mobile jaw moves towards the fixed jaw.The stuff will be crushed in this process.The angle between toggle plate and moving jaw decreases when moving jaw moves down,the moving jaw moves leaves fixed jaw by pulling rod and spring,the final crushed stuff will be discharged from the outlet.

Specifications

Model	Feeding opening size (mm)	Max feeding size(mm)	Discharge opening size (mm)	Capacity (t/h)	Motor Power (kW)	Weight (t)	Overall dimension (L×W×H)（mm）
PE250×400	250×400	210	20-60	5-20	15	2.8	1180×1087×1245
PE400×600	400×600	340	40-100	16-60	30	6.65	1797×1716×1581
PE500×750	500×750	425	50-100	40-110	55	11.73	2119×1918×2046
PE600×900	600×900	500	65-180	80-180	55-75	16.13	2309×2028×2368
PE750×1060	750×1060	630	80-180	110-320	90-110	30	2730×2472×2840
PE870×1060	870×1060	750	170-270	180-360	90-110	31.22	2990×2416×2893
PE900×1200	900×1200	780	95-225	220-450	110-132	49	3362×2750×3260
PE1000×1200	1000×1200	850	195-280	280-550	110-132	51	3823×2938×3285
PE1200×1500	1200×1500	1020	150-300	400-800	160-220	100.9	4930×3334×4057
PEX150×750	150×750	120	18-48	8-25	15	3.5	1252×1593×1025
PEX250×750	250×750	210	20-50	13-35	30	4.96	1435×1832×1715
PEX250×1000	250×1000	210	25-60	16-52	30-37	6.5	1706×1964×1380
PEX250×1200	250×1200	210	25-60	20-61	37-45	8.8	1700×2132×1450
PEX300×1300	300×1300	250	20-90	25-95	55-75	12.6	2026×2320×1723

Model		ZXC96	ZXC106	ZXC110	ZXC125	ZXC160
Width of feeding opening (mm)		930	1100	1100	1250	1600
Deepth of feeding opening (mm)		580	630	850	950	1200
The max feeding size (mm)		460	530	680	760	960
Power （kW）		90	110	160	160	250
Eccentric shaft speed (rpm)		330	280	230	220	220
Capacity (tph)		120-455	170-330	190-625	290-845	520-1275
The width of discharge opening size (mm)		60-175	110-170	70-200	100-250	150-300
Overall dimension (L×W×H) （mm）		2830×1983×1924	3346×2111×2376	3890×2374×2836	4111×2596×2952	5690×3318×3843
Weight (kg)		11353	18700	26150	39239	79993
Output size (mm)	The tight side discharge opening (mm)	Ton/Hour	Ton/Hour	Ton/Hour	Ton/Hour	Ton/Hour
0-30	20
0-35	25
0-45	30
0-60	40
0-75	50
0-90	60	120-155
0-105	70	140-180	155-200	190-250
0-120	80	160-210	175-230	210-275
0-135	90	180-235	200-260	235-305
0-150	100	200-260	220-290	255-330	290-380
0-185	125	250-325	280-365	310-405	350-455
0-225	150	300-390	335-435	370-480	410-535	520-675
0-260	175	350-455	390-510	425-550	470-610	595-775
0-300	200		445-580	480-625	530-690	675-880
0-340	225				590-770	750-975
0-375	250				650-845	825-1070
0-410	275					900-1170
0-450	300					980-1275