The impact crusher has reliable performance and stable operation. The output of the impact crusher can reach 30-2000t/h. It is often used in stone production lines with a jaw crusher. The side length can be 100-500mm, and the compressive strength will not be stained. The medium and brittle materials of 350MPa are finely crushed and processed. It has the advantages of large crushing ratio, good material size after crushing, and diversified crushing specifications. This is due to its various adjustable and controlled output particle types and particle sizes. The method will be introduced in detail next.

Cobblestone, also known as river pebbles, is mainly composed of silicon dioxide, and also contains elements and compounds such as iron oxide, manganese, copper, and aluminum. Cobblestone is a kind of building material. Because of its hard quality, good compression resistance, wear resistance and corrosion resistance, it is a popular Zhongxin building material and is widely used in construction and road construction industries.

The eccentric shaft plays an important role in the operation of the jaw crusher, but there is a problem in the use of problems, and we only find out the faults, specific problems are specific to the specific analysis to eliminate it more quickly. So, what are the common faults of the jaw crusher eccentric shaft?

Cone crushers are widely used in mine production. Its main advantages are high output, low use cost, exquisite structure, simple operation, low maintenance, wide application range, and high utilization rate. Among them, the hydraulic cone crusher is improved on the basis of the traditional cone crusher. The crushing capacity is large and the production efficiency is high. The key is the hydraulic system. So what is the function of the hydraulic system of the hydraulic cone crusher?

Cone crusher is a kind of crushing machinery and equipment commonly used in mine crushing and stone crushing. The correct feeding method will not cause blockage during operation. So what should we do when the cone crusher shows partial blockage of the feedstock?
Because the feed size is not uniform, the transition between the feed hopper and the feed opening forms a right angle, especially when the degree of dryness and wetness of the ore changes, it constitutes a blockage. The correct feeding method and the splitting of the cone crusher Combination of the disc and the feed box will help ensure that the fully mixed material is evenly distributed along the entire crushing cavity. The segregation of fine materials and coarse materials should be kept as small as possible to minimize the wear of the liner. Regardless of the type of cone crusher, if the material condition is not very good, it is recommended to screen before crushing.