Is the jaw crusher by the dust worn?

The jaw crusher is the main crushing equipment of the ore production line. It is generally used for coarse crushing of ore. The large-sized stone is broken into small pieces and then processed. Usually the jaw crusher works outdoors, and the environment is relatively bad. Dust will be generated, and we need to pay special attention to the dust pollution of the jaw crusher.

In order to reduce the dust caused by air leakage from the crusher casing, in actual production, when the material is dry, water is often poured at the inlet of the crusher. In fact, this situation is wrong, which will aggravate the bag filter of the jaw crusher. The filter bag and the feeder are clogged.

During the falling process of the ore and other materials on the belt conveyor, the air enters the sealed dust hood together with the material, and the dust-containing gas diffuses outside the cover through the gaps and holes in the cover wall. In addition, due to the improper setting of the dust removal point at the corner of the belt conveyor The dust collector has al* no effect on the dust of the lower belt conveyor regardless of the opening and closing. Since the jaw crusher was in operation, the dust collector has not been operated, and the lower belt conveyor has been in the process of dust pollution.

When the crushing material of the jaw crusher has a large humidity, the elbow portion is easily worn by the dust and the dust particles that are blocked into the dust collector are thicker than the broken dry material, and the bag type dust remover is easy to paste the bag, and the feeder is easy to block. As a result, the ventilation resistance of the bag filter is *ly increased, and the ventilation capacity is lowered, resulting in wear of the jaw crusher.